Page 3
For technical questions, please call 1-888-866-5797.
Item 58424
Charging Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Insert the end of the Adaptor cord into the
Charging Jack, located in one of the handgrips.
2. Plug the AC/DC Adaptor into a 120V outlet.
3. The Charge Light Indicator will light up during
charging. After approximately 2 h 45 m, all four
lights on the Charge Light Indicator should be
lit up, indicating the Work Light is fully charged
and ready for use. Unplug the Adaptor.
NOTE:
Do not leave the Battery in a discharged
state. Charge the Battery every 3 months if the
Work Light is not in use. This will keep the Battery
from wearing down and add to its life. Do not charge
the Work Light at temperatures below 40° F.
Operation Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
NOTE:
Before using Work Light for the
first time, fully charge the Battery.
1. Press On/Off Switch once to turn Light on.
Light will turn on in low brightness mode.
2. Press On/Off Switch a second time
to change to high brightness.
3. Press On/Off Switch a third time to turn the Light off.
4. Length can be adjusted by pulling on the hooks.
Maximum length is 85
″
. Use hooks to attach Light
to desired position, such as a lifted car hood.
5. When Light is in place, Light can be rotated
to desired position by twisting. Light will
click into place as you rotate it.
6. When finished using the Work Light,
store indoors away from children.
Battery Removal
1. Contains Li-Ion Battery. Battery must be
recycled or disposed of properly.
2. To remove Battery, make sure Light is
off and disconnected from
Adaptor.
3. Open Housing to access Battery.
Note:
Light is not user serviceable, only
open housing to remove Battery.
4. Cut wires attached to Battery. Battery
may be adhered to housing. Carefully
pry Battery out of housing.
