7. OPERATION
7.1
Switch On
The
Voltage
R e g ul a t o r
Make sure all the loads connected to the voltage regulator are switched off.
Make sure the
MANUAL BYPASS SWITCH
is on the
"AVR"
(or
"II")
position.
Put the
INPUT AIR BREAKER
to
"ON"
position, the voltage regulator starts to work.
Switch on the loads one by one.
7.2 Switch Off
The
Voltage
Re g ula to r
Switch off all the loads.
Put the
INPUT AIR BREAKER
to
"OFF"
position.
7.3 From Regulating Mode to Bypass Mode
Switch off all the loads.
Put the
INPUT AIR BREAKER
to
"OFF"
position.
Put the
MANUAL BYPASS SWITCH
to
"BYPASS"
(or
"I)
position.
Put the
INPUT AIR BREAKER
to
"ON"
position
Switch on the loads one by one.
7.4 From Bypass Mode to Regulating Mode
Switch off all the loads.
Put the
INPUT AIR BREAKER
to
"OFF"
position.
Put the
MANUAL BYPASS SWITCH
to
"AVR"
(or
"II)
position.
Put the
INPUT AIR BREAKER
to
"ON"
position.
Switch on the loads one by one.
7.5 Operation Of Display Panel
Each digital display shows the
Input Voltage, Output Voltage, Output Current
for each
phase(A, B,C), and the
Line Voltage
(AB, BC, CA) for Input and Output. It also shows the
status of the voltage regulator by means of symbol:
"L": Output Under Voltage
"H": Output Over Voltage
"C": Transformer Windings Over Temperature
"F": Overload
"P": Input Wrong Phase Sequence
Press
SWITCH BUTTON OF PHASE AND LINE VOLTAGE
to switch the display
between
Phase Voltage
and
Line Voltage.
Press
SWITCH BUTTON OF INPUT AND OUTPUT
to switch the display between
Input Voltage, Output Voltage, and Output Current.
Press down the
DELAY BUTTON
to select the delay time of 180 seconds, press
it up to select the delay time of 6 seconds.
10
