manualshive.com logo in svg

Braun Corporation CENTURY 02 Series, Руководство оператора

Описание: Braun Corporation CENTURY 02 Series - эргономичный и надежный инвалидный автомобильный лифт, помогающий мобильным людям с ограниченными возможностями безопасно путешествовать. Узнайте как использовать его на максимуме с помощью бесплатного Руководства Оператора. Скачайте его со manualshive.com.

Поделиться
Скачать
background image

Page 35

Replace missing, worn
or illegible decals.
Failure to do so may
result in serious bodily
injury and/or property
damage.

WARNING

Decals and Antiskid

Decals

The lift is only as safe as the opera-
tor.  Replace any missing, worn or
illegible decals!  Part numbers are
provided for decals.  Inspect your lift for
missing, worn or illegible decals.  Call
1-800-THE LIFT for replacements.

29082

19342

22249

28540

Note:  Clean surfaces
with isopropyl alcohol
before decal or antiskid
application.  Use a clean
cloth or paper towels.
Do not use oily shop
rags.  Wipe surface free
of residue with dry
portion of cleaning cloth.

See Decals on page 36 also.

25674

25675

WARNING

Adjust switch as specified
in installation/service
manual.

HYDRAULIC
PRESSURE SWITCH
ADJUSTMENT

Improper hydraulic
pressure switch
adjustment may result 
in serious bodily injury 
and/or property damage.

27154

27154

WARNING

LIFT OPERATING
INSTRUCTIONS

¥ Read manual before operating lift.
¥ Load and unload on level surface
  only.
¥ Engage vehicle parking brake before 
  operating lift.
¥ Provide adequate clearance outside 
  of vehicle to accommodate lift.
¥ Do not operate lift if you suspect lift
  damage, wear or any abnormal
  condition.
¥ Keep operator and bystanders clear
  of area in which lift operates.

Whenever a wheelchair passenger
is on the platform, the:
   ¥ Handrail belt must be latched
   ¥ Passenger must be positioned
     fully inside yellow boundaries
   ¥ Wheelchair brakes must be locked
   ¥ Roll stop(s) must be up
Failure to follow these rules may result
in serious bodily injury and/or property
damage.

      

Note:  Handrail belt must be 

      latched to operate lift.

OPEN DOOR(S) AND SECURE

TO UNFOLD PLATFORM:

    Stand clear and press     UNFOLD
    switch until platform stops (reaches
    floor level).

      

Note:

  

In event platform does not

      unfold, press     FOLD switch to 
      release Lift-Tite“ latches.

TO UNLOAD PASSENGER:

1. Load passenger onto platform and
    lock wheelchair brakes.
2. Press     DOWN switch until entire
    platform reaches ground level and 
    roll stop unfolds fully.
3. Unlatch handrail belt.
4. Unlock wheelchair brakes and unload
    passenger from platform.

TO LOAD PASSENGER:

1. Load passenger onto platform and
    lock wheelchair brakes.
2. Latch handrail belt.
3. Press     UP switch to fold roll stop
    up and raise platform to floor level.
4. Unlock wheelchair brakes and unload
    passenger from platform.

TO FOLD PLATFORM:

    Press     FOLD switch until platform
    stops.  Release switch.

CLOSE DOOR(S)

28540

U.S. Patents:  5,261,779     
6,065,924        6,238,169     Patents Pending

MANUAL OPERATION

29082

TO REMOVE PUMP HANDLE:

1.  Rotate top clip.

Using hand pump handle:

TO UNFOLD PLATFORM (OUT):

      1. Close hand pump valve 
          (turn clockwise).
      2. Insert handle in pump and 
          stroke until platform folds 
          fully (stops).
      3. Open hand pump valve (turn 
          counterclockwise) until
          platform reaches floor level.
          Open 1/2 turn only. 
      4. Close hand pump valve
          (turn clockwise).

  
DOWN (TO LOWER):

      Open hand pump valve (turn 
      counterclockwise).  Open 
      1/2 turn only.

UP (TO RAISE):

      1. Close hand pump valve 
          (turn clockwise).
      2. Insert handle in pump and
          stroke until platform reaches 
          floor level.

 

 TO FOLD PLATFORM (IN):

      Insert handle in pump and stroke.

Note:  Close valve before operating
           electric pump.

TO STORE PUMP HANDLE:

1.  Insert bottom of handle
     behind bottom clip.
2.  Rotate clip to lock.

O

P

E

N

C

L

O

S

E

OPEN

VALVE

CLOSE

UNLOCK

LOCK

OPERATING
INSTRUCTIONS

                                       Standees must
stand at center of platform (fully inside 
yellow boundaries), grip handrails and 
lower head to clear door jamb header.

                                        Lift Interlocks
vary in type and operation.  Interlock
(if equipped) must be operated as
instructed by transit authority.

Read warnings and operate lift as 
outlined on LIFT OPERATING 
INSTRUCTIONS decal.  Lift operating 
instructions apply to wheelchair 
passengers and standees.

Standee Instructions:

Interlock Instructions:

19342

WARNING

Contact The Braun
Corporation before
adjusting hydraulic
pressure relief 
valve.  Failure to 
do so may result 
in serious bodily 
injury and/or
property damage.

22249

WARNING

Lift installation and servicing prohibited by 
anyone who has not been certified by The Braun 
Corporation Sales and Service School.  Certified 
service technicians should call 1-800-THE LIFT 
to receive applicable installation/service manual.  
Failure to follow this policy may result in serious 
bodily injury and/or property damage.

25675

WARNING

Read manual before 
operating lift.  Call 
1-800-THE LIFT to 
receive operator's 
manual.  Failure to 
do so may result in 
serious bodily injury 
and/or property 
damage.  Keep 
manual in lift pouch.

25674

Oper

ual

Man

ator's

Содержание CENTURY 02 Series














































Отзывы:

Нет отзывов

Похожие инструкции для CENTURY 02 Series

Handicare C1000 Owner'S Manual preview
C1000
Бренд: Handicare Страницы: 32
MAHA HL CS 4.0 Operating Instructions Manual preview
HL CS 4.0
Бренд: MAHA Страницы: 23
ShoreStation SSV40108HAC Service Manual preview
SSV40108HAC
Бренд: ShoreStation Страницы: 19
Elektra Beckum MIG/MAG Welding Machine MIG/MAG 301 E Operating Instructions Manual preview
MIG/MAG Welding Machine MIG/MAG 301 E
Бренд: Elektra Beckum Страницы: 36
Mobile Warming 7.4VOLT HEATED GLOVES User Manual preview
7.4VOLT HEATED GLOVES
Бренд: Mobile Warming Страницы: 6
Aqua Creek F-105LAR Instructions preview
F-105LAR
Бренд: Aqua Creek Страницы: 3
ubbink Ubiflux W400 + Installation Regulations preview
Ubiflux W400 +
Бренд: ubbink Страницы: 61
Jacka Industries JackaJay Installation Manual preview
JackaJay
Бренд: Jacka Industries Страницы: 36
National Instruments PCI/PXI-781 R Series Getting Started preview
PCI/PXI-781 R Series
Бренд: National Instruments Страницы: 15
Jarvis COMPLIFT LIGHT DUTY 1 Instruction Manual preview
COMPLIFT LIGHT DUTY 1
Бренд: Jarvis Страницы: 2
Leviton Dimensions D3200 System Installation Manual preview
Dimensions D3200
Бренд: Leviton Страницы: 43
Halma Ampac MAN3053-1 Installation Manual preview
Ampac MAN3053-1
Бренд: Halma Страницы: 6
Acces USB-DIO24-CTR6 User Manual preview
USB-DIO24-CTR6
Бренд: Acces Страницы: 20
Fronius Robacta Reamer V 70 Han12P Operating Instructions Manual preview
Robacta Reamer V 70 Han12P
Бренд: Fronius Страницы: 76
weinor Tempura Instructions For Assembly Maintenance And Use preview
Tempura
Бренд: weinor Страницы: 20
Jet SLT-660F Operating Instructions And Parts Manual preview
SLT-660F
Бренд: Jet Страницы: 16
FISCHER 18092 Original Instructions Manual preview
18092
Бренд: FISCHER Страницы: 100
Solter SOLMIG 160 Manual preview
SOLMIG 160
Бренд: Solter Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды