MANUAL P/N 900000015 REV 1.2
11
3
Unpacking and Installation
3.1 Unpacking
Remove the Network Time Device from the shipping carton. The following items should be
included in the shipment:
•
1 Network Time Device
•
1 user guide
3.2
Installation
To complete the Network Time Device installation process, follow the steps given.
1.
Insert the power cord into an electrical socket.
2.
Connect one end of an Ethernet cable to the Network Time Device Ethernet.
3.
Connect the other end of the Ethernet cable to a hub. Within a few seconds the IP
Address of the device is displayed and the time currently being displayed is automatically
corrected.
4.
Open your Internet browser and type the IP Address of the device in the Address bar. For
example, if the IP Address of the device is 192.168.1.1 then type either 192.168.1.1 or
http://192.168.1.1 and press <Enter>.
5.
Configure the Network Time Device. For more information on Network Time Device
configuration, refer to the Configuration section of the user guide.
Furthermore, the Network Time Device may be mounted onto a standard rack mount enclosure
using four 10/32 screws only if the part number for the Network Time Device is either 060000001
or 060000002.
