7. At the end of the
programme
The machine stops automatically.
If you have depressed the ANTI-
CREASE
button, the machine will
stop with the water left in the tub, to
prevent the fabric from creasing. To
drain the water and spin, release the
same button. To drain only, select
programme “
”.
The door is controlled by a safety
device which releases 2 minutes after
the end of the programme.
Switch the machine off by depressing
the ON/OFF button again. The mains-
on light goes out.
Remove the laundry.
Turn the drum by hand to make sure it
is completely empty, so as to avoid
any forgotten items being damaged in
a subsequent wash (e.g. shrinking) or
their colour running into a load of
whites.
Release any buttons which have been
pressed.
Turn the water taps off and unplug the
machine.
Leave the door ajar to air the
machine.
11
Operating Sequence
Operating Sequence
10
Drying only
You have for example just machine-
washed and spun at 1200 rpm 4.5 kg
(10 lb) of laundry.
They are cotton fabrics of medium
weight which you want to iron as soon
as they are dry.
Switch off the machine.
Then remove the laundry from the
appliance and divide the items to
obtain two loads of approx. 2.25 kg
(5 lb) each.
1. Load the laundry
Open the door by pulling the catch
outward.
Load the items one at a time and
close the door.
2. Select the programme
Turn the programme selector dial
clockwise to the drying programme
for cotton.
P0803S
3. Select the required time
Following indications given in the
programme chart on page 24, turn the
drying time selector dial clockwise to
the 60 mins setting in the red sector.
4. Start the machine
Depress the ON/OFF button
, the
mains-on light and drying light will
illuminate and the machine starts
operating.
P0045
M0031a
60
90
