Brandt TG1089XC, Руководство по установке

Страница: 4 / 22

4
5. Test the appliance:
•
Depress the control knob and turn to full flame setting.
•
The burner will ignite. Adjust control knob to desired setting. Normally,
no adjustment should be necessary.
•
If any problems occur, refer to the fault isolation chart.
6. Instruct the user to keep the users instructions manual.
If the above test does not produce satisfactory results, the agent’s service department should
be consulted for more specialized assistance.
7. The Domino is fitted with the flame failure device that cuts off the gas supply when
burner flame extinguishes suddenly or abnormally in order to avoid the gas leakage.
8. Room Ventilation
When installing built-in gas hob on top of stove cabinet, please check that there is provision
for ventilation at the cabinet to ensure proper operation of the gas hob.
9. Gas Connection
According to the Gas Safety Regulations of Hong Kong, any gas installation works
including the installation of appliances and connection tubing, must be undertaken by
registered gas installers who are registered for that appropriate classes and be employed by
registered gas contractors.
10. Town Gas Connection
Use approved gas tubing bearing EMSD approval marking (such as :
機電工程署批准
EMSD APPROVAL GTXXXX) for connection to appliances, or other appropriate methods
accepted by EMSD. The appliance shall be connected with external gas governor (brand:
Beckley, model 2300, working pressure 1kPa).