Brandt TE212FS1, Руководство по эксплуатации

Страница: 29 / 48

29
This appliance should be installed by
a qualified technician / installer.
Prior to installation, ensure that the
local distribution conditions (nature
of the gas and gas pressure) and the
adjustment conditions of the
appliance are compatible.
These hobs are designed to be used by
private individuals in their homes.
The adjustment conditions are stated on
a label in the wallet and also on the
packaging.
This appliance must be installed and
connected in compliance with the
regulations in force, and used only in a
well-ventilated area. Consult the
instructions before installing and using
this appliance.
Installing your hob in all simplicity
Since this appliance is not connected to a
combustion products evacuation device.
Particular attention should be given to the
relevant requirements regarding
ventilation.
On this subject, combustion can take
place only if oxygen from the air is
present, so this air must be constantly
renewed and the combustion products
must be evacuated (a minimum air input
of 2 m3/hour per kw of gas energy is
required).
These hobs have type X protection (in
accordance with standard EN 60.335.2.6)
against overheating of cupboards and
Class 3 for installation itself (in
accordance with standard EN 30.1.1).
F
itting recommendations
Standard cutout
Model
Width
Depth Height
Depending on the unit
Outside
dimensions above
the work surface
60 cm
53 cm 5,8 cm
Outside
dimensions below
the work surface.
55 cm 47,5 cm 3,4 cm
49 cm 56 cm
99628881_ML_AWS.qxd 09/07/03 15:33 Page 29