Brandt me1245m, Инструкция по эксплуатации

Страница: 20 / 24

EN
4/USING YOUR APPLIANCE
20
The three memory functions allow you to record three common programmes that you can then
select rapidly.
Programming a memory touch control Display
Access the memory function by pressing the
MEMO touch control.
M1 flashes. (Press the touch
control again to switch to M2... M3.)
Enter the cooking programme of your choice.
Instead of pressing START, confirm your
programme by pressing the MEMO touch control
for a second. M1 (M2/M3) is displayed and a beep
confirms the programme was saved.
Using a memorised programme Display
Press the MEMO touch control ; M1 is displayed.
Choose memory programme M2 or M3 by again
pressing the touch control .
The memorised programme is displayed.
Confirm the selection by pressing START.
The oven turns on and the programme begins.
Notes:
Follow the same procedure to cancel and replace the previously entered programme.
You can use the memory feature for all functions.
• MEMORY PROGRAMMES M1 / M2 / M3
M 1
M 1
M 1
You can also program the “TIMER” function on your microwave oven.
Programming Display
Turn the +/- selector to enter the desired time,
e.g. 10 minutes.
Confirm the selection by pressing START.
The countdown of the entered time begins.
Three beeps are sounded to announce the end
of the programme.
To cancel, press STOP for two seconds.
•TIMER
6
1 0 : 0 0
0 0 : 0 0