Brandt me1245m, Инструкция по эксплуатации

Страница: 14 / 24

EN
4/USING YOUR APPLIANCE
14
After hooking up your appliance or after an extended power outage, “
1 2 : 0 0
” will flash in the
display.
To set the time on the clock Display
Turn the +/- selector to set the time, e.g 6:30.
Confirm by pressing the MEMO touch control.
A beep confirms that the time has been set.
To change the time Display
Press and hold the MEMO touch control for five
seconds.
The time display flashes.
Enter the new time (e.g. 7:30) by turning the +/-
selector.
Confirm by pressing the MEMO touch control.
A beep confirms that the new time has been set.
Comments
:
After 30 secondes if you do not press the MEMO touch control, the time adjustment is
cancelled.
If you think that there is not enough space for your dish to rotate freely in the oven, programme
the
STOP TURNTABLE FUNCTION before or durng the programme.
Note: It is not possible to stop the turntable during an automatic defrosting programme.
Programme Display
Press the STOP TURNTABLE touch control; the
turntable symbol changes.
To cancel this function, press again.
Comments
:
You must turn the cookware and stir its contents halfway through
the programme if the stop turntable function is activated.
• STOPPING THE TURNTABLE
• SETTING AND ADJUSTING THE TIME
6 : 3 0
1 2 : 0 0
0 6 : 3 0
0 7 : 3 0