51
a l l y o u r o v e n
The oven may be housed either under a work surface or built into a
column that is open* or closed with a suitable opening.
Your oven works at its best and produces excellent results when cooking and clea-
ning itself, if its air circulation is not compromised:
• The oven must be centred in the unit so that there is a minimum distance of 5
mm between it and the surrounding unit.
• The housing unit or its outer surface must be capable of withstanding heat.
• To ensure the oven rests firmly in the housing, screw it to the housing unit using
the holes on the side uprights provided (see diagram).
To do this:
1)
Remove the rubber stoppers masking the fixing holes.
2)
To prevent the housing unit splintering, drill two holes 3 mm in diameter in the wall of the
housing unit opposite the fixing holes.
3)
Attach the oven using the two screws.
4)
Conceal the hole using the rubber stoppers. (These also help to cushion the
closing of the oven door).
(*) If the housing unit is open at the back, the gap must not be more
than 70 mm.
If you are unsure about fitting this oven yourself please use a
qualified electrician.
Dimensions for installation use
GB
99625352.qxd 14/10/02 11:47 Page 51
Содержание FE 210
Страница 15: ...15 99625352 qxd 14 10 02 11 47 Page 15...
Страница 29: ...29 99625352 qxd 14 10 02 11 47 Page 29...
Страница 43: ...43 99625352 qxd 14 10 02 11 47 Page 43...