59
5 / OVEN COOKING MODES
EN
-
Cooking with delayed start and chosen
cooking end time
Proceed as with programmed cooking.
- After setting the cooking time, press the
touch control “
” until the “
” end of
cooking indicator flashes.
The display flashes 0:00 to indicate that you
can now adjust the setting (fig.
1
).
- Press the
+
or
-
touch control to set the de-
sired cooking end time.
Example: end of cooking at 13:00 (fig.
2
).
The cooking end time is automatically record-
ed after a few seconds.
The cooking end time display stops flashing.
After these 3 steps, the oven heating is de-
layed so that cooking ends at 13:00.
At the end of cooking (end of programmed
time),
- the oven stops,
- the cooking time indicator and 0:00 both
flash (fig.
3
).
- A series of beeps is emitted for a few min-
utes. The beeps can be definitively stopped
by pressing any touch control.
The display shows the time once again when
the function selector switch is returned to 0
(fig.4
),
In the case of programmed cooking cycles,
the cavity lights up until cooking begins, and
remains lit until cooking is finished.
fig.1
fig.2
fig.3
fig.4
PROGRAMMED COOKING
•
99638345_A_ML.qxp 16/01/2007 10:54 Page 59
