Brandt BKS6135, Руководство пользователя, Страница: 21 / 88

1.1
DESCRIPTION OF THE OVEN
Description of the oven
1
Control panel
Door
Handle
A
B
C
1.4
ACCESSORIES
• Turntable
The turntable ensures equal cooking of food
throughout with no need to intervene.
It rotates in either directions. If it does not turn,
verify that all components are properly positioned.
It may be used as a cooking dish. For easy
removal, wells are provided on either side.
Rotation is controlled by the drive shaft and the
wheel support.
If you take out the support with the drive spindle,
make sure you do not let water get into the motor
spindle orifice.
Remember to put back the support, the support
wheels and the glass turntable.
Do not try to rotate the glass turntable manually,
as you could damage the drive system. If it does
not turn smoothly, make sure that there is nothing
in the well beneath the turntable.
When the turntable is in the stop position, large
dishes can be used which cover the entire surface
of the oven. In this case, it is necessary to turn the
container or to mix its content half-way through the
programme.
2.1
UNPACKING
When you receive the appliance, unpack it or have
it unpacked immediately. Check its general
appearance. Make a note of any reservations on
the delivery slip and keep a copy. Remove all the
protection elements. Check and respect the
appliance’s characteristics that appear on the
nameplate.
2.2
CHOICE OF LOCATION AND FITTING
This appliance must be installed under a worktop
as shown in the installation diagram.
Do not use your appliance immediately (wait
approximately 1 to 2 hours) after moving it from a
cold location to a hot location, as the condensation
may cause a malfunction.
Centre the oven in the cabinet so as to ensure a
minimum distance of 10 mm between the
appliance and the surrounding unit. The material
Installation
2
Set clock and cooking time/Menu
- button
+ button
Start/Pause
1
2
3
4
1.2
DISPLAY
1.3
BUTTONS
Cooking time
End of cooking
Keypad lock
Minute Minder
1 2 3 4
ENGLISH