Brandt BKC6575X, Руководство пользователя

Страница: 12 / 19

When the turntable is in the stop position, large
dishes can be used which cover the entire surface
of the oven. In this case, it is necessary to turn the
container or to mix its content half-way through the
programme.
2.2
HOW YOUR OVEN WORKS
The microwaves used for cooking are
electromagnetic waves. They are commonly found
in our environment in the form of radio waves, light
and infrared rays.
Their frequency is in the 2450 MHz range.
Their behaviour:
· They are reflected by metals.
· They travel through all other materials.
· They are absorbed by water, fat and sugar
molecules.
When food is exposed to microwaves its molecules
begin moving rapidly, causing it to heat up.
The penetration depth of waves into the food is
approximately 2.5 cm; if the food is thicker, the
centre of the food will be cooked by conduction, as
in conventional cooking.
Note that microwaves cause a simple thermal
phenomenon within food and are not harmful to
health.
2.1
UNPACKING
When you receive the appliance, unpack it or have
it unpacked immediately. Check its general
appearance. Make a note of any reservations on
the delivery slip and keep a copy. Remove all the
protection elements. Check and respect the
appliance’s characteristics that appear on the
nameplate (2.1.1)
2.2
CHOICE OF LOCATION AND FITTING
This appliance must be installed under a worktop
as shown in the installation diagram (2.2.1 à
2.2.3).
Do not use your appliance immediately (wait
approximately 1 to 2 hours) after moving it from a
cold location to a hot location, as the condensation
may cause a malfunction.
Centre the oven in the cabinet so as to ensure a
minimum distance of 10 mm between the
appliance and the surrounding unit. The material
of the cabinet supporting the appliance must be
heat resistant (or covered with a heat-resistant
material).
For greater stability, attach the oven to the cabinet
with 2 screws through the holes provided on the
side panels.
2.3
ELECTRICAL CONNECTION
Warning :
Installation should only be performed by
installers and qualified technicians.
The appliance must be recess-fitted correctly to
ensure electrical safety. The electrical connections
should be made before the appliance is installed in
its housing.
Ensure that:
Warning:
The safety wire (green-yellow) is
connected to the appliance’s terminal
and must be connected to the installation’s
earth.
If the oven malfunctions in any way, unplug
the appliance or remove the fuse
corresponding to the sector where the oven
is hooked up.
Warning:
We cannot accept liability for any
accident or incident resulting from non-
existent, defective or incorrect grounding.
Installation
2
Warning:
If the electrical installation in your home
requires any changes in order to connect your
appliance, contact a professional electrician.
If the oven malfunctions in any way, unplug
the appliance or remove the fuse
corresponding to the sector where the oven
is hooked up.
ENGLISH