Brandt BKC6575X, Руководство пользователя

Страница: 16 / 19

ENGLISH
5.1
»COOKING GUIDE» FUNCTION
The “Cooking guide ” function selects the
appropriate cooking parameters for you based on
the food being prepared and its weight. Select the
Cooking Guide function. You must choose a pre-
programmed food from the following list:
P01 : Prepared frozen meal
P02 : Prepared fresh meal (Combined function)
P03 : Frozen pizza (Combined function)
P04 : Frozen pizza (Traditional cooking)
P05 : Fresh pizza
P06 : Quiche
P07 : Savoury tart
P08 : Poultry
P09 : Beef
P10 : Pork
P11 : Prepared fresh meal (Microwave)
P12 : Fish
P13 : Fibrous fresh vegetables
P14 : Fresh vegetables
P15 : Frozen vegetables
Select the function with .
Choose your programme with and then
confirm by pressing OK.
A suggested weight flashes on the screen.
Enter the actual weight of the food with and
then confirm by pressing OK .
By pressing , you access the cooking end time
setting (delayed start).
If necessary, set the required cooking end time
and then confirm by pressing OK again. The
oven starts.
AUTOMATIC DEFROSTING FUNCTIONS
The automatic functions select the appropriate
cooking parameters for you based on the food being
prepared and its weight. Select a pre-programmed
food from the following list:
DEFR1 : Defrosting meat, poultry and ready meals*
DEFR2 :Defrosting fish*
DEFR3 : Defrosting bread*
* These positions do not allow a delayed start.
Select the function on the automatic function for
defrosting .
Cooking guide
5
6.1
MEMO 1/2/3 (Memory function)
The memory function lets you save 3 frequent
cooking (or defrosting) programmes that you may
then select quickly to use.
Programming a memory key.
First of all, programme the cooking of your choice
by turning the function selector (e.g.: Fan cooking
, etc.).
Adjust the temperature and the power (e.g.:
220°C) then the cooking time (e.g.: 25 minutes).
Save your cooking programme by pressing and
holding the OK key until:
MEMO -1- flashes in the display. Choose one of the
free programmes to be memorised: 1 – 2 or 3 with
the and keys to switch from one to the
next. Press the OK key to confirm; a beep confirms
that the programme has been saved.
Using a memorised programme
Select the function on Memo 1/2/3. MEMO -1-
flashes in the display.
Select the memory 1 – 2 or 3 with and to
switch from one to the next.
Press the OK key; the memorised programme is
displayed. Press the OK key again; the oven
switches on and the programme starts.
Note :
Follow the same procedure to replace the previous
programme.
You may memorise all functions except for the
automatic programmes.
Using memo
6
Select a programme and enter the weight of the
food with and (in 50g steps) then confirm
by pressing OK . The oven starts.
By pressing , you access the cooking end time
setting (See the delayed start chapter).
Halfway through the cooking time, the oven beeps
and displays «TURN» to tell you to turn your food
over.