39
Your appliance complies with
the European directives and
their amendments.
ENERGY-SAVING MEASURES
In order to reduce the power
consumption of your appliance:
•
Install it in a suitable
location (see "Installing your
appliance").
•
Leave the doors open for
the shortest time possible.
•
Never put hot food in the
fridge or the freezer, and in
particular
soups
and
other
preparations that release a lot of
steam.
•
Check that your appliance
is working correctly and do not
allow
too
much
ice
to
accumulate
in
the
freezer
(defrost when the ice is more
than 5-6 mm thick). Clean the
condenser on a regular basis
(see
chapter
"Routine
maintenance
of
your
appliance").
•
Regularly check the door
seals and make sure that the
doors can be closed properly. If
this is not the case, contact
after-sales service.
• Do not adjust the temperature
too low.
•
Failure to install the draws,bins
and shelves properly can result
in increased power consumption.
Warning
If your transported the appliance
horizontally, position it vertically
and wait for 2 hours before
connecting it. A little oil may flow
into thecooling circuit. Allow
enough time for the oil to return
to the motor before connecting
the appliance, failing which, it
could be
Always unplug your appliance
before any maintenance work.
Never pull on the power cord, but
only on the plug itself.
CLEANING
AND
MAINTENANCE
Always switch off the
appliance
before
any
maintenance operations.
Never clean the appliance
with
metal
objects,
steam
systems, volatile oils, organic
solvents or abrasive components.
Do not use sharp or cutting
objects
to remove the ice. Use a plastic
sponge.
Refer
to
the
"Maintenance" chapter in this
manual to replace the light bulb.
WARNING!
Please
keep the product far
away fire source during
using, service and disposal.
There are flammable materials at
the back of the appliance. Pay
attention to the
symbol “Risk of
fire
– flammable material” which
is located on rear of the
appliance.
