11
8.
Change screw hole covers on middle
cover plate from left to right (as shown
in figure below).
9.
Place refrigerator flatwise, remove part
③
and then loose screws
④
. Remove
part
②
and part
①
.
10.
Unscrew the lower hinge, change it to
the near hole site, and then screw up
and mount the washer.
11.
Repeat the step 9, change part
①
to
left and part
②
to right and then fix
them with screws
④
. Finally install part
③
.
12.
Move the lower door and adjust its
position to align lower hole site and
upper hinge axis. Turn the middle
hinge by 180, change the washer on
the axis to the upper side, adjust the
middle hinge to the appropriate
position and then install it.
13.
Unscrew the upper hinge axis, turn
the upper hinge over and fix axis on
it. Then place it at side for use.
14.
Exchange wires both in the left and
right slots of refrigerator body
15.
Move the upper door to appropriate
position, adjust part
①
and upper
door, Move the connecting wire
②
in the slot of upper door from right
to left, and then fix part
①
and wire
②
w
ith screws
③
.
(Please hold upper door by hand
when installing)
Installing your new appliance
Note: washer may stick to
lower door
Lower hinge part
left
Handle covers
Special self-tapping screws
Handle
Screw hole covers
Door holder
Stop block
Self-tapping screws
Lower honge part (right)
Front foot fixed board
Adjustable bottom feet part
Self-tapping screw
Note : washer may
stick to lower door
washer
washer