Brandt BCG6600W, Руководство по эксплуатации, Страница: 7 / 29

You must observe the following cooker po-
sitioning dimensions (
fig.1 and 2 ):
- 10 mm between the sides of the appliance
and the walls or units.
-
30 mm between the wall and the back of
the appliance, with the cover closed.
- Depth dimension of cooker positioning bet-
ween the wall at the back and the front of
the appliance:
610 mm (see fig. 2, viewed
from above).
1 2 3
10mm
150m
m
150m
m
610 mm
40 mm
The cooker must be connected to the single
phase 220-240 V mains power supply and
the protective wire (yellow/green) must be
connected to the earth terminal
of the
installation.
Appliances are supplied with a power
supply cable and a power plug (depending
on model). If it is necessary to change this
power supply cable or if the power supply
cable is damaged, it must be replaced by
the manufacturer, its After-Sales Service
department or a similarly qualified
individual to avoid danger. The cable must
be of type H05VVF with 3 x 1 mm
2
conductors.
Class I appliance power supply cables must
have a yellow/green conductor connected
to the earth terminal
of the appliance
and to the earth contact of the power
plug.
The appliance must be connected to the
mains power supply via a 2P+T CEI60083
standard power plug (see fig. 3) or a
multiple-pole disconnection switch
compliant with the installation regulations
in force.
If connection is via a power socket, this
must remain accessible after installation.
2 / INSTALLING YOUR APPLIANCE
Caution
In the event of an accident resulting from
an incorrect or inexistent earth, we shall
not be held liable.
POSITIONING THE COOKER •
ELECTRICAL CONNECTION
(depending on model)
•
3 TYPES OF COOKER POSITIONING
fig.2
fig.1
Caution
Do not install the cooker on a base.
Neutral
(N)
Phase
(L)
Earth
Blue wire
Brown, black or
red wire
Yellow/green
wire
fig.3