Brandt BCG6600W, Руководство по эксплуатации, Страница: 18 / 29

3 / USING YOUR APPLIANCE
•
Advice for using the hotplate
burners
To ensure that the burners ignite correctly,
we advise the following:
- inspect regularly to check that the igniter
electrodes are thoroughly clean and that the
burner components are operating correctly,
- before igniting, check that the burner
heads and caps are fitted correctly,
- place the pans on the pan support before
pressing the push-button to ignite.
It is advised not to operate the
electronic ignition if not all burners are
fitted in position.
- The burner flames are smaller at pan
support level to protect the enamel of the
pan support.
- The appearance of yellow spots is due to
the type of gas used, but has no detrimental
effect on burner performance.
- The noise generated by the burners is
related to their power, but this does not
alter the performance of the hotplate.
- When moving the pans from one burner to
another, lift rather than slide them to avoid
dislodging the pan supports.
Burner cap
Burner head
Ignition electrode
Thermocouple (depending on model)
Injector
A
B
C
D
E
A
E
B
C
D
Caution
Take care to avoid too many spills when
using the hotplate burners. This can cause
liquid to leak through the upper vents of
the door and make the interior glass dirty,
but has no effect on the operation of your
appliance.
USING THE HOTPLATE
BURNERS
•