Brandt BCG6600W, Руководство по эксплуатации

Страница: 11 / 29

•
Changing the injector for the
oven and grill (depending on
model)
Change the injectors by carrying out
the following steps:
- Remove the deflector by unscrewing the
2 screws holding it (
fig.1
)
- Remove the back cover by unscrewing the
11 retaining screws (
fig.1
)
- Unclip the metal clip located at the base of
each burner (hotplate and grill) (
fig.2
)
using a small screwdriver.
- Remove the injector that caps the pipe.
-
Check that the seal is correctly fitted
in position on the aluminium tube.
Otherwise, remove it from the injector
without damaging it and fit it onto the
tube.
- Cap the tube with the new injector while
checking that its identification mark
matches with the gas specifications table.
- Refit the tube and clip-on the metal clip.
- Screw the back cover and deflector back
on.
2 / INSTALLING YOUR APPLIANCE
CHANGE OF GAS TYPE
•
Caution
It is essential to refit the seal on the
aluminium tube before fitting the new
injector.
fig.2
Tube
Metal clip
Injector
Seal
fig.1
Deflector