INSTALLATION INSTRUCTIONS
Step 4: Remove spare tire and slide (3) supplied Push
Nuts on the studs.
Install Chassis Harness
Step 5: Plug the Camera connector into the gray
Chassis Harness connector, and insert RCA connector
end of supplied Chassis Harness through the rear gate
vent behind tire carrier.
Step 6: Using a plastic trim removal tool, remove
interior panels on the inside of the rear gate.
Step 7: Pull harness through the rear gate openings.
Step 8: Use supplied Wire Ties to secure Chassis
Harness to existing harness.
Step 9: Use supplied Wire Ties to secure Chassis
Harness to fabric factory wire cover. CAUTION: Leave
enough slack to allow the gate to open fully.
9002-8817 Instructions
Page 3 of 7
