INSTALLATION INSTRUCTIONS
Please read so you do not VOID the
warranty:
If the camera harness is run through the center on the
camera bracket, it will cut the camera harness. This will
void the warranty on the camera.
Install Camera
Step 1: Loosen lug nuts to remove the spare tire.
Step 2: Slide Camera on studs placing harness end
inside of tire carrier.
Do not run harness through the
camera bracket opening
.
Step 3: Temporarily replace spare tire to check wheel
clearance to Camera.
Wheel Alignment for Camera Clearance
9002-8817 Instructions
Page 2 of 7
