Brammo Enertia 2010, Руководство пользователя, Страница: 56 / 92

Throttle
Throttle Inspection (Refer to Safety Precautions on pages 44 & 45)
You Enertia is equipped with a fly by wire electronic throttle. There is
no throttle cable or throttle freeplay to inspect or adjust. You should
inspect that the throttle assembly is secure and that it operates
smoothly and freely. If the throttle assembly is loose or if there is any
binding or sticking, check the following or contact your BRAMMO
Authorized Service Agent.
1. Check that the throttle assembly is positioned properly and the
securing screws are tight.
2. Check that the throttle housing, two nylon washers, and throttle grip
are not binding and are clean of dirt and debris.
3. Check for smooth rotation of the throttle from fully open to fully
closed. The throttle should snap fully closed when released from
fully open.
4. Check that the throttle grip and the bar end have adequate
clearance.
Servicing Your Enertia 56
1
Bottom view of throttle
2 3 4

 

WARNING
A sticking throttle could result is a runaway condition that
could cause a crash in which you can be seriously hurt or killed.
If your throttle is sticking, determine what is causing the
sticking and remedy the problem before riding your Enertia.