Brammo Enertia 2010, Руководство пользователя, Страница: 39 / 92

Charging
Powering up the Enertia in CHARGE mode.
1. Turn the handlebar all the way to the left (or right).
2. Insert key into the ignition.
3. Push in on the key and turn it to the LOCK
position (counterclockwise).
4. Release the key, then continue turning the
key to the CHARGE position (counterclockwise).
5. Press and hold the Tank Button.
6. Enertia will power up in the CHARGE mode.
7. Remove the key.
8. Unlock the seat.
9. Plug the Enertia into a standard A/C outlet.
After the Enertia powers up in the CHARGE mode, the dash
will illuminate, all lighting and the horn will function. When
A/C power is detected, the Enertia will begin to charge.
While charging, the Enertia will display the estimated charge
time remaining and state of charge in percentage.
Batteries, BMS & Charging 39
CHARGE
Position
OFF
Position
Press and hold the Tank
Button until bike powers up
A/C not connected warning

 

NOTE
The Enertia will automatically shut down in CHARGE
mode if A/C power is not detected after 60 seconds.
You have 60 seconds from the time the Enertia powers
up in CHARGE mode to plug in the A/C power cord.
Charging Enertia screen