Brain Corp ICE Robotics RS26 Скачать руководство пользователя страница 50

Страница: 50 / 52

V4.0119

•

Content Subject to Change

AINTENANCE

RAKE

ELEASE

ROCEDURE

If the machine is inoperable and/or immobile, it can be manually moved by releasing the brake with the brake
release wedge.

Perform the following steps to release the brake:

1. Turn the ignition key to the left (counter-

clockwise) to turn off the machine.

2. Locate the brake release lever on the front wheel

of the machine.

NOTE

IF NECESSARY, TURN THE STEERING

WHEEL TO ACCESS THE BRAKE RELEASE
LEVER.

3. Slide the brake release wedge in between the

brake release lever and the front wheel.

4. Push the machine to a safe location where it

can remain until a service technician arrives to
perform repairs.

5. Once the machine is positioned in a safe place,

remove the brake release wedge.

Do not perform the brake release procedure on an incline.

Once the brake is released, do not push the machine down inclines as it may be unsafe and
difﬁ cult to stop.

The brake release procedure requires you to access the underside of the machine, and then physically
push the machine. Take proper precautions to avoid injury when performing these tasks.

Two people are required to move the machine once the brake is released; one person to steer and one to
push.

Check for and clean up any residual water or liquids on the ground before performing the brake release
procedure.

Be cautious not to slip on wet ﬂ oors, especially while pushing the machine.

Do not attempt to perform this brake release procedure if you have any health issues or physical
limitations.

Содержание ICE Robotics RS26





















































Результаты поиска

Содержание ICE Robotics RS26

Отзывы:

Похожие инструкции для ICE Robotics RS26

Бренды по названию

Популярные бренды

Brain Corp ICE Robotics RS26, Руководство по эксплуатации

Результаты поиска

Содержание ICE Robotics RS26

Отзывы:

Похожие инструкции для ICE Robotics RS26

Бренды по названию

Популярные бренды