Braillo 400 S 3 Series Скачать руководство пользователя страница 18

Страница: 18 / 97

Operating Panel functions

COUNT1 / COUNT2

Selects which sheet (not pages!) counter that is viewed on the left hand side in the display. Selects

between counter 1 and 2. When this button is in the outer (released) position, counter 1 is displayed,

and when the button is in (depressed), counter 2 is displayed.

DUMP BUFFER

During normal double sided printing, a volume of text of less than two pages will not be printed. This

is because the printer is waiting for a full two page print job. By pushing DUMP BUFFER, the text

remaining in the buffer will be printed.

PRINT VALUES

Prints the current values of the LAYOUT, I/O and ASCII-TABLES.

See chapter 3.3 “Print Values”.

SCROLL

Scrolls through the menus activated by:

I/O, ASCII-TABLES, LAYOUT 1, LAYOUT 2, LAYOUT 3 or LAYOUT 4 buttons.

RESET COUNT

Resets the sheet counter selected by COUNT1/COUNT2.

TEST PRINT

This button has two functions: Test Print and Ready/Continue.

Test Print:

1st push down:

Prints a X-pattern on both sides of the sheet which shows each pin from each magnet rack

printing on a separate line. Useful when searching for missing dots.

2nd push down:

Prints full cells and empty lines, together with the ASCII-table on both sides of the sheet.

Useful for testing the printing pressure adjustments, and to see how the paper tolerates tightly

grouped dots. (The paper migth get a little “deformed” on this test).

3rd push down:

Prints full cells and empty lines, together with the ASCII-table single-sided. Useful for testing

the printing pressure adjustments.

4th push down:

Prints a test pattern made of dot 1,3,5 and 2,4,6, single-sided. Useful when searching for

extra dots.

5th push down:

As 1st push down etc.

Ready/Continue:

When the printer runs out of paper, the message PAPER OUT is shown on the display. Insert

new paper, and push TEST PRINT in and out, and the printer will continue printing the last

print job.

Do not use RESET PRINTER as this will clear the print job from the printer’s memory!

BRAILLO

●

NORWAY AS

B 400 Series 3

Содержание 400 S 3 Series


































































































Результаты поиска

Содержание 400 S 3 Series

Отзывы:

Похожие инструкции для 400 S 3 Series

Бренды по названию

Популярные бренды

Braillo 400 S 3 Series, Руководство пользователя

Результаты поиска

Содержание 400 S 3 Series

Отзывы:

Похожие инструкции для 400 S 3 Series

Бренды по названию

Популярные бренды