Brahler Digivote III, Инструкция по эксплуатации оборудования

Страница: 7 / 30

DIGI VOTE® III
VD30 parliamentary / TR30
Copyright by Brähler ICS
7
Important remarks
For customers in the EU and in the USA
The equipment is complying with the standards of the CE regulations. These standards are
specified to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. The equipment can radiate radio frequency energy and if
not installed and used according to the user manual it may cause harmful interference to radio
communications. Any changes or modifications which are not explicit approved in this manual
could void your authority to operate this equipment.
The equipment must be connected to ground!
Safety
Check that the operating voltage of the unit is identical with the voltage of your local power supply.
If a voltage conversion is required, consult your BRÄHLER ICS dealer or qualified staff.
Should any liquid or solid object fall into the housing, unplug the unit and let it check by qualified
staff before further operations. Unplug the unit from the power outlet or set the mains power switch
to OFF if it’s not used for several days. To disconnect the cord, pull it out holding the plug. Never
pull the cord itself.
Installation
Allow proper air circulation to prevent internal heat accumulation. Do not place the unit on a
surface that may block the ventilation holes.
Do not install the unit in a location near heat sources or in a place exposed to direct sunlight,
excessive dust, humidity, mechanical vibration or shock.
Do not install the unit when it is changed from cold outside to warm inside. In this case wait approx.
1 hour until temperature is even-tempered.
Cleaning
To keep the housing in its original condition, periodically clean it with a soft cloth. Stubborn stains
may be removed with a cloth lightly dampened with a mild detergent solution. Never use organic
solvents such as thinners or abrasive cleaners as these will damage the cabinet.
Repacking
If possible save the original shipping carton and packing material; they will become useful if you
ever have to ship the unit. In this case please keep the manual and the unit together. For maximum
protection, re-pack the unit as originally packed by the factory.
If not supplied with the equipment, a complete transport and storage box system is available from
BRÄHLER ICS. We recommend using this system for long-term protection and care.