Brahler Digivote III, Инструкция по эксплуатации оборудования

Страница: 12 / 30

VD30 parliamentary / TR30
DIGI VOTE® III
12
Copyright by Brähler ICS
Installation hints
Before connecting the transponder to the PC you have to install the driver delivered on
the DIGIVOTE
®
Setup CD. Insert the CD in your drive and follow the instruction when
starting the Computer. See also the software manual DIGIVOTE
®
III.
Operation with one Transponder
The transponder TR30 is connected via the cable TR30-USB/5 (08.2410.5 - see Appendix) to a
USB port on your computer.
Alternative connection is possible with cable TR30-232/10 at the serial computer port. The power
supply NT-TR30 (19.0853.X6) is mandatory in connection with serial interface and charging the
optionally rechargeable battery respectively.
The connection of the power supply is done by a XLR-connector – lockable.
VD30 parliamentary
voting unit
TK50-DVIII
Charging and storage tray
Video
Projector
VD30 parliamentary
voting unit
VD30 parliamentary
voting unit
VD30 parliamentary
voting unit
(or RS232/485)
TR30
Transponder
Windows PC ®
DIGIVOTE III
Software
XGA
USB
The working range between the transponder and the voting unit is up to 50m (radius), depending
upon the specific location and the building conditions.
Note: To avoid interference with reception or operation, position the transponder at a minimum
distance of 3m from the computer or the monitor or other electromagnetic sources of interference.
The maximum distance between PC and transponder depends on the way of data connection:
With USB: not more than 5 metres
with RS232: maximum 50 – 100 metres
with RS485: maximum 1000 metres