Brahler Band II, Руководство по эксплуатации

Страница: 21 / 32

INFRA COM® IRX32/12/4
Channel shift
Press „CH
4
“ to scroll through to „SH” . If receiver is set to Band IV (b4) operation, there is no
Channel Shift possible.
The Shift mode is identified with „SH” and is normally in the off-position (factory
default), displayed as „oF” . To activate the Shift mode push the „VOL
t
” . Now, with
each pushing the „VOL t ” key the number of channels to be shifted increases.
Pushing „VOL u ” decreases the number.
When Shift mode is activated "SH" and also "XX" (number of shifting channels) is
displayed alternately. As described under "Starting the receiver", all channels above t
selected number are shifted to the top, so that disturbing influences by lighting syste
can be avoided. In shift mode the original channel is displayed with
"or" instead of
"00" .
he
ms
Display of Shift mode
For deactivating Shift mode push the „VOL
u
“ key to number 00.
The number of available channels will be reduced, if channels above Channel 31 would be used by the shift
mode. Therefore, using shift mode with IRX32 always reduces available channels, with IRX12 only when
shifting by more than 20 channels, and with IRX4 only when shifting by more than 28 channels.
Band switching (Band II and Band IV)
Press „CH 4 “ to scroll through to „b2” . The receiver is set in operation mode Band II. Remark: In
Band IV operation mode no Shift mode is available.
The display shows the used Band operation mode: “b2” for Band II or “b4” for
Band IV. Pressing „VOL
t
” (Band IV) or „VOL
u
” (Band II) will switch to the other
operation Band.
Display of the used band (b2)
Charging mode
Press „CH 4 “ to scroll through to „CH” . The receiver shows the charging mode.
Display of the charging
mode (HC)
“HC” means high current charge (default); “LC” means low current charge. The
charging mode is not modifiable at this point.
Charging mode is useful when receiver is charged in the charging case TK50.
Copyright by Brähler ICS
21