Brahler Band II, Руководство по эксплуатации

Страница: 18 / 32

IRX32/12/4 INFRA COM®
Service mode
The service mode is useful to check the receiver-settings or adjust the receiver to special parameters
needed like:
¾ Check of firmware version
¾ Check of battery voltage
¾
Measurement of IR field-strength
¾ Display of factory test settings
¾ Activating/deactivating of muting
¾ Activating/deactivating of shift-mode
¾ Switching from Band II to Band IV and reverse
Activation of the service mode
The „CH 3 “ and the „CH 4 “ key must be pressed simultaneously for about 3 sec.
You will see „SE“ within the display: starting point for
adjustments.
„SE“ flashes within the display, alternating with the version
number of the firmware
(e.g. 51 or higher).
Service mode activated Display of version (e.g. 5.1)
By repeatedly pressing the „CH
4
“ or „CH
3
“ key you can scroll through the Service mode for further
activities.
The structure is as follows:
SE
∟ bA
Battery voltage
∟ rF
Hi / no / Lo and channel number
∟ ° GU
Guard installed
∟ P1 Service Mode 1
∟ P2 Service Mode 2
∟ P3 Service Mode 3
∟ U Γ
Muting oF / On
∟ SH
Shift oF / adjustable number of channels to be shift
∟ b2
b2: Band II / b4: Band IV (not displayed if SH (Shift) is avtivated)
∟ HC
Charging mode; HC high current LC low current charge; not modifiable
∟ En / nd
End of service mode
18
Copyright by Brähler ICS