Brähler Systems INFRACOM ICen IV, Руководство по эксплуатации

Страница: 12 / 28

ICen IV INFRA COM®
12
Copyright by Brähler ICS
4. Installation and starting up
The Compact Transmitter has an ex-works mains voltage setting of 90 to 250 Volts by
50 to 60 Hz. If there is another voltage range you must not connect this equipment. In
connecting the system, special attention is to be paid to ensure that all cables are installed
in cable ducts or that they are fixed by cable clamps or adhesive tape in such a way that there is
no danger of somebody tripping over them.
4.1 Connecting the OR-IN socket
XLR OR-IN connector (female): socket for feeding in the original channel
(CDS200 sound / AUTOMIC sound). The level can be set via the trimming
condenser.
The input is balanced via AF transformer.
4.2 Connecting the OR-OUT socket
XLR OR-OUT connector (male): socket for the output of the original sound. The
output is also balanced via AF transformer. The output level can be set via a
trimming condenser
– this is done in dependence with the input level.
4.3 Connecting LINE-OUT sockets
XLR LINE-OUT connector (male): All eight
interpreter channels available for PA
system or for recording purpose.
4.4 Connecting RF-LINK socket
BNC socket for cascading another Compact Transmitter ICen IV: To manage more
In- and Outputs you can extend the INFRACOM system up to 16 line and more
outputs.
…