UNI EN ISO 9001-2015 n° 9115.BRMO
USER MANUAL
“Aquarius Plus”
File name
Date
Page
Code
PUT9I001 PUT9I1K5
DF19009A
05/04/19
23
di
32
PUT9I002
PUT9I003
MD03006C
- All rights are reserved according to the law. Reproducing or distributing this document to third parties without permission is prohibited.
Finally, the measurement relating to the internal temperature of the group and those relating to the
battery will be available: available voltage and capacity.
5.7
Run mode
5.7.1
Bypass mode
The visual indications in Bypass mode are as follows:
The yellow LED on indicates that the UPS is in Bypass, the sound signal emits a sound every
two minutes, even the red LED that signals an attention situation is on. The display shows the
measurements related to the load and the battery capacity.
Bypass mode is activated in the following conditions:
When the UPS is in line mode and the network fails.
When the UPS is overloaded.
Attention: When the UPS operates in Bypass mode it is not possible to use the batteries as a
backup.
5.7.2
Line mode
The visual signals in Line mode are as follows:
Illustrazione 17:
Potenza
