CHECKLIST
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Unit level and secure.
All roof or other penetrations
properly sealed.
Ductwork completed and air
distribution checked and outlets
correctly set.
Mains wiring complete.
Control switch correctly
installed.
Belt tension and alignment
correctly adjusted.
Fan runs in correct direction at
all speeds (clockwise when
viewed from pulley side).
Motor power (tong) tested.
Power input to motor recorded
High amps.
Low amps.
Motor pulley adjusted and tight
on Shaft.
Water bleed/drain/overflow
fitting correctly installed.
Water level and float adjustment
checked.
Filter material (wood wool)
evenly packed in all pad frames.
Pump runs and water evenly
distributed to all filter pads.
Bleed rate adjusted to
lt/min.
All control functions checked.
Owner instructed in correct
operating procedure .
Owners Name:
Telephone:
Address:
Dealer:
Installer:
Date Installed:
Model No.:
Serial No.:
If you have followed the instructions and still have
problems, the Braemar service network is only a phone
call away. They can help with any aspect of operation
you may not be sure of, or arrange for a service person
to fix any faults.
However, please bear in mind that if a service call
reveals no fault with the Braemar unit, you may be
charged for the call, even during the warranty period. In
the first instance we recommend you contact the retailer
from whom you purchased the unit. They will be familiar
with your installation and will be anxious to rectify any
difficulties.
FREECALL
1300 650 644
For all your Braemar warranty and
service needs. Or contact your
local Braemar dealer direct
SEELEY INTERNATIONAL
–
OWNER
’
S MANUAL
5
