Brady Bradyprinter THT 300X-PLUS, Руководство пользователя

Страница: 40 / 180

12 Bradyprinter THT X-Plus II Series User Guide
Getting Started
Select a Site for the Printer
Select a Site for the Printer
Consider the following when selecting an appropriate location for your printer.
Select a Surface
Select a solid, level surface of sufficient size and strength to accommodate the printer
and other equipment (such as a computer), if necessary. The choices include a table,
countertop, desk, or cart.
Provide Proper Operating Conditions
Because the printer was designed and is fabricated as an industrial-type unit, it
functions satisfactorily in a location that conforms to specified environmental and
electrical conditions, including a warehouse or factory floor. For more information on
the required conditions, see
General Specifications on page 133 .
The following table shows the temperature and relative humidity requirements for the
printer when it is operating.
Allow Proper Space
The printer should have enough space around it for you to be able to open the media
door. To allow for proper ventilation and cooling, leave open space on all sides of the
printer.
Provide a Data Source
If the printer will be located away from the data source, the selected site must provide
the appropriate connections to that data source. For more information on the types of
communication interfaces, see
Communication Interfaces on page 15 .
Mode Temperature Relative Humidity
Thermal Transfer 41° to 104°F (5° to 40°C) 20 to 85% non-condensing
Direct Thermal 32° to 104°F (0° to 40°C) 20 to 85% non-condensing
Caution • Do not place any padding or cushioning material behind or under the
printer because this restricts air flow and could cause the printer to overheat.