manualshive.com logo in svg

Brady Bradyprinter THT 300X-PLUS, Руководство пользователя, Страница: 116 / 180

Поделиться
Скачать
Brady Bradyprinter THT 300X-PLUS Скачать руководство пользователя страница 116

88

 

Bradyprinter THT X-Plus II Series User Guide

Front Panel Controls

Front Panel LCD

CONTROL 
PREFIX

Control Prefix Character

The printer looks for this two-digit hex character to indicate the start of a 
ZPL/ZPL II control instruction.

Note • 

Do not use the same hex value for the control, format, and delimiter 

character. The printer must see different characters to work properly.

1.

Press the left oval to move to the next digit position.

2.

Press the right oval to increase the value of the digit.

Default:

 7E (tilde—displayed as a black square)

Range:

 00 to FF

FORMAT PREFIX

Format Prefix Character

The format prefix is a two-digit hex value used as a parameter place marker in 
ZPL/ZPL II format instructions. The printer looks for this 2-digit hex character 
to indicate the start of a ZPL/ZPL II format instruction. See the

 ZPL II 

Programming Guide Volume I

 for more information.

Note • 

Do

 not

 use the same hex value for the control, format, and delimiter 

character. The printer must see different characters to work properly.

1.

Press the left oval to move to the next digit position.

2.

Press the right oval to increase the value of the digit.

Default:

 5E (caret)

Range:

 00 to FF

DELIMITER CHAR

Delimiter Character

The delimiter character is a 2-digit hex value used as a parameter place marker 
in ZPL/ZPL II format instructions. See the

 ZPL II Programming Guide 

Volume I

 for more information.

Note • 

Do

 not

 use the same hex value for the control, format, and delimiter 

character. The printer must see different characters to work properly.

1.

Press the left oval to move to the next digit position.

2.

Press the right oval to increase the value of the digit.

Default:

 2C (comma)

Range:

 00 to FF

LCD

Description

Содержание Bradyprinter THT 300X-PLUS





















































































































































































Отзывы:

Нет отзывов