Brady BBP 30, Руководство пользователя

Страница: 45 / 56

Printer Maintenance
Rev A 35 BBP
®
30 User’s Manual
Clean Tape Entrance
This procedure cleans the tape entrance, exit area and exit chute. The tape entrance can
become sticky because of adhesive buildup
Note:
Clean the exit area
after
cleaning the sensors (see page 34 ). The cleaning
swab may be damaged when cleaning the exit area.
Materials Required
• Cleaning Kit (Cat # B31-CCT), includes foam swabs, adhesive scraping tool, plastic bottle
(not available in all regions)
• Kimwipes
®
or other non-abrasive cloth
• Isopropyl Alcohol
• Compressed Air Bottle, purchased locally (e.g., HOSA AIR-464 Gear Duster)
CAUTION CAUTION
Always wear safety glasses when using compressed air.
To clean the tape entrance:
1.
Lightly moisten a lint-free cloth with isopropyl alcohol.
CAUTION CAUTION
Do not use isopropyl alcohol on the print head! Isopropyl alcohol may
permanently damage the print head.
2.
At the top of the tape entrance, rub along entire length of the tape entrance to remove the
adhesive residue [2]. If necessary, use the adhesive scraping tool or other flat-edged tool,
covered with the Kimwipe, to push against the tape entrance to clean all of the residue
from the entrance.