Brady BBP 30, Руководство пользователя

Страница: 25 / 56

System Power
Rev A 15 BBP
®
30 User’s Manual
System Power
These procedures describe how to power-up the printer when starting from a non-powered
state (i.e., printer has been unplugged) and how to remove power from the printer.
Note:
With power removed (i.e., printer disconnected from power source), the
system clock retains its settings for about 30 days.
Starting Printer
1.
To start printer from a cold state : Plug the printer into a power source. The system
automatically recognizes the supply information for the installed media and ribbon and the
display panel indicates
Ready
.
Note: The backlight for the display panel turns off after a pre-defined period of time.
2.
To turn on the backlight : Press any button.
Powering Off the Printer
When the system is shut down, the display turns off.
To completely remove printer power:
1.
Disconnect the power cord from the printer.
To perform a soft power down:
2.
Press and release the Power button . The screen goes blank and the backlight goes
off.
Rebooting the Printer
Use this procedure to reboot the printer (e.g., if the screen freezes).
To reset the printer:
1.
Press and hold the Power button for at least 5 seconds. The system performs the
initialization process and restarts the printer.
2.
When the Ready displays, you can continue printing your labels.