2
S19-324D1
Installation
6/11/2020
Bradley •
215-1848 Rev. G: ECO 20-05-028
WARNING
Power supplied to the unit should be between 90-264VAC, 50-60 Hz, 15 amp branch circuit with a
dedicated circuit breaker or fuse and should not supply power to any other device. Compliance
and conformity to local codes and ordinances is the responsibility of the installer.
Do not use this safety equipment in a location that does not match its hazardous location rating.
Verify the appropriate ratings prior to installation.
When making electrical connections be sure to follow all lockout–tagout safety procedures.
Flush the water supply lines before beginning installation and after installation is complete. Test
the unit for leaks and adequate water flow. Main water supply should be “ON” at all times unless
system is being serviced. Provisions shall be made to prevent unauthorized shutoff.
CAUTION
Supply the unit with clean, potable water.
NOTICE
Before installing this product, ensure that there are adequate clearances around the product and
activation of the product does not interfere with other products or obstructions.
It is recommended that all water supply and electrical connections be made at temperatures above
freezing. Failure to do so may result in major product and/or property damage.
Constant power supply to safety equipment is necessary for it to function.
Avoid cleaners containing organic solvents, alcohols and hydrocarbons. Rinse with potable water
after cleaning.
