3
Installation
HN-250 Surface-Mounted Shower (Title 24)
Bradley •
215-006 Rev. B; ECN 15-03-004
4/29/2015
Pre-Installation Information
Material
Control Panel Material: The shower control panel is constructed of 14-gauge type 304 stainless steel .
Valve and Component Material: All exposed parts (except seat cover) are stainless steel or polished chrome-plated
brass . Valve bodies are brass casting .
Supplies Required
• 1/2" IPS hot and cold water supplies
• (6) 1/4" wall anchors and bolts to install shower mounting bracket and fasten bottom cover to wall
• (6) wall anchors for 1/4"-20 x 1-1/4" hex socket screws to install grab bar
The HN-250 shower is furnished assembled for job site installation. Particular care must be taken by the
contractor for proper placement of the shower. Always check local codes for compliance.
Dimensions
60" (1524mm)
Min Clear Face
of Finish to Face
of Finish
30"
(762mm)
Min
36"
(914 mm)
36"
(914 mm)
Level and Clear Area
Optional 8562
Shower Seat
Optional L-Shaped
Grab Bar
