5
Installation
HN-250 Surface-Mounted Shower (Title 24)
Bradley •
215-006 Rev. B; ECN 15-03-004
4/29/2015
Install Mounting Bracket
2
A
Scribe horizontal and vertical lines on the
wall at the dimensions show .
B
Install 1/4" wall anchors (supplied by
installer) for 1/4" diameter bolts at the three
locations where the vertical and horizontal
lines intersect .
C
Mount the shower mounting bracket to the
wall anchors with three 1/4" diameter bolts
(supplied by installer) .
It is the installer's responsibility to use the
correct anchors for the particular job's wall
construction.
8"
(203mm)
25-5/8"
(651mm)
8"
(203mm)
Shower Mounting Bracket
(3) 1/4" Anchor
and Screw
Locations
77-5/8"
(1972mm)
A .F .F
Mount Shower and Grab Bar
3
A
Hang the HN-250 shower onto the mounting
bracket by placing the top angle of the
shower into the lip of the bracket .
B
Secure the bottom cover flange to the wall
with three 1/4" diameter bolts (supplied by
installer) .
C
Position the grab bar to fit the back wall .
Using the flange as a template, mark two
bolt hole locations on the wall .
D
Install six wall anchors (supplied by
installer) for 1/4" - 20 screws at the bolt hole
locations .
E
Secure the "L" of the grab bar to the wall
anchors with the 1/4" - 20 screws .
For information on Bradley Grab Bar Mounting
Kits, please visit bradleycorp.com.
Shower Mounting Bracket
1/4-20 screws
(by installer)
Bottom Cover
Flange
1/4-20 screws
(by installer)
