background image

EXD-3/WH97

Express® Deck Lavatory
System EXD Series

Express® Decks are ADA
compliant.

P.O. Box 309, Menomonee Falls, WI  53052-0309
Phone: 1-800-BRADLEY Fax: (262) 251-5817
http:\\www.bradleycorp.com

Table of Contents

Dimensions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installation Instructions  . . . . . . . . . . . . . . . . . 3-8
Cleaning and Maintenance  . . . . . . . . . . . . . . . . .8
Assembly of Components . . . . . . . . . . . . . . . . . .9
Vernatherm

Valve . . . . . . . . . . . . . . . . . . . . . .10

IMPORTANT

Read this entire installation manual to ensure proper installation, then file these
instructions with the owner or maintenance department.

Flush all the water supply lines before making connections. Debris in supply
lines will cause the valves to malfunction.

Turn OFF electrical power to the outlet when installing the Express® Deck.

Wall anchors used must have a minimum pull-out rating of 1,000 lbs.

Darker-colored solid surface materials require more maintenance and are
susceptible to “blushing” in applications where water temperature exceeds
110°F. For these applications we recommend mixing valve/tempered water
(mixing valves are available through your Bradley representative).

Product warranties may be found under "Product Information" on our web site at
www.bradleycorp.com.

215-1278 Rev. C; EN 03-817
© 2004 Bradley Corporation
Page 1 of 10

6/8/04

Installation
Instructions
For Service Only

Содержание Express EXD Series











Отзывы: