background image

S59-1000T1 

Installation

4

 

8/7/2012

 Bradley 

•฀215-1736฀Rev.฀B;฀EN฀฀12-03-009

A

Place the escutcheon on the wall over the 
valve and secure with the screws provided.

B

Place handle on stem as shown, and tighten screw.

Attach Escutcheon and Handle

3

Содержание Equa-Flo EFT1

Страница 1: ...rature position Failure to adjust properly may result in serious scalding This valve may not protect from scalding if there is a failure of other temperature controlling devices elsewhere in the plumbing system Excessive heat may cause damage to internal parts Separate parts from packaging and make sure all parts are accounted for before discarding packaging material If any parts are missing do no...

Страница 2: ...F 21 C If the water temperature is below 70 F 21 C the display will refresh every 10 seconds 3 The unit can be configured to display F or C by a slide switch inside the display s battery compartment see Step 2 4 A Low Battery indicator will turn on when batteries have approximately one month of power remaining AAA alkaline batteries supplied 8 203 72 1829 40 1016 Temperature Probe Tee on Bottom of...

Страница 3: ...rk on Cap Arrow on Cap Hot Limit Stop Off Stop Set Screw You can fine tune the hot limit stop position 1 2 spline by flipping it over Limit Stop Normal Limit Stop Flipped FOR BACK TO BACK INSTALLATIONS A Turn off water supplies and remove 2 hold down screws from the reversed valve Rotate cap and cartridge assembly 180 and re install screws B Remove both limit stops and rotate 180 Align with alignm...

Страница 4: ...ation 4 8 7 2012 Bradley 215 1736 Rev B EN 12 03 009 A Place the escutcheon on the wall over the valve and secure with the screws provided B Place handle on stem as shown and tighten screw Attach Escutcheon and Handle 3 ...

Отзывы: