Page 8
B
RADFORD
W
HITE
C
ORP.
2.D Quick Start
To navigate to the Quick Start Screen, touch the
Quick Start Icon in the lower left-hand portion of the
Home Screen.
Screen 4. Home Screen
Screen 5. Quick Start Screen
CH
is Central Heat
DHW
is Domestic Hot Water
2.D.1 CH /DHW
On the Quick Start Screen, touch the CH/DHW
thermometer icon to navigate to the CH Selection
Screen
There are two identical heat demands, CH1/DHW1
and CH2/DHW2, each with independent control
algorithms and independent inputs on the input
terminal strip.
Screen 6. CH/DHW Quick Start Selection Screen
Touching CH1/DHW1 navigates to the CH1/
DHW1 Quick Start Screen
2.D.1.a CH1 /DHW1
1
Screen 7. CH1/DHW1 Quick Start Screen
NOTE:
CH1 applies to hydronic units (BWCH),
while DHW1 applies to volume water units (BWCV).
• Enable/Disable
– This allows CH1/DHW1 to be
enabled/disabled. The default setting is Enabled.
•
Set Point
– This is the temperature that this heat
demand will control to.
2.D.1.b
CH2/DHW2
2
To navigate to the CH2/DHW2 Quick Start Screen,
touch the CH2 Icon on the CH/DHW Quick Start
Selection Screen.
Screen 8. CH2/DHW2 Quick Start Screen
NOTE:
CH2 applies to hydronic units (BWCH),
while DHW2 applies to volume water units (BWCV).
