Page 7
COPPER BRUTE II (500 - 2000) USER'S MANUAL
2.C
Keypad Operations
The “Back” button jumps to the
previous screen.
Screen 2.
A typical numeric keypad entry screen.
Screen 3. A Typical selection screen.
To delete the current setting before
entering in the new value.
The “Enter” button is used to accept
the new value that was just entered.
This is the indicator that will be shown when
the correct password has been entered to
allow the setting to change.
The highlighted button (orange)
shows which one is selected.
Some screens may only allow you
to set one or the other, while some
other screens (example: pump
selection) will allow you to select
any or all of the options.
These windows will reflect the
allowable ranges that the setting
can be adjusted to.
Shows the current setting
of the Parameter.
NOTE: You can always tell exactly where you have navigated to by
looking at the icons in the
Navigation Bar.
In this example you are in
“Up and Down” arrows are used to
increment the setting accordingly.
Home/Configure/Central Heat/Central Heat One
As you navigate in, you will find that all screens have either
a numeric keypad to enter in your customizable parameters OR
selection buttons to choose the device of your configuration.
