Bradco SG26, Руководство оператора и каталог запасных частей

Страница: 23 / 65

LUBRICATION
9775 7-29-14-2
GENERAL INFORMATION
Economical and efficient operation of any machine is dependent upon regular and prop -
er lubrication of all moving parts with a quality lubricant. Neglect leads to reduced efficiency,
wear, breakdown and needless replacement of parts.
DAILY / EVERY 8 HOURS
All parts provided with grease fittings should be lubricated every 8 hours. If any grease
fittings are missing, replace them immediately. Clean all fittings thoroughly before using the
grease gun.
IMPORTANT: Avoid excessive greasing. Dirt collects on exposed grease and greatly in-
creases wear. After greasing, wipe off excessive grease from fittings.
LUBRICATION SYMBOL
Lubricate daily or every 8 hours of operation, whichever comes last, with SAE Multi-Purpose Lubri -
cant or equivalent SAE Multi-Purpose type grease.
CAUTION! SHUT OFF ENGINE AND REMOVE KEY BEFORE LUBRICATING EQUIP-
MENT.
8
WEEKLY
The oil level in the gearbox should be checked once a week. Fill as necessary with 80-
90 weight gear lubricant.
TO CHECK:
Remove access cover from front of frame. Remove pipe plug from end of gearbox. Lubricant should be at
the same level as the plug.
TO ADD:
Remove pipe plug from the gearbox and add 80-90 weight gear lubricant until level with plug. Replace
pipe plug.
NOTE: Removing vent plug when filling will speed up the filling process.
BOTH ENDS OF
HYDRAULIC CYLINDERS
PIVOT POINTS
8
8
IMPORTANT: DO NOT OVERFILL,
AS TOO MUCH LUBRICANT MAY
RUPTURE THE GEAR BOX SEALS.
PIPE
PLUG
VENT PLUG
GEARBOX
ADD LUBRICANT
TO THIS LEVEL.
75578 21