EN
IMPORTANT SAFEGUARDS
1. Please read through the following safety precautions carefully before switching on
the Table Blender.
2. Keep this instruction manual in a safe place for future reference. Also keep the
sales receipt and, if possible, the gift box with the inner packaging.
3. Failure to follow all the instructions listed may result in electric shock, fire or
serious personal injury.
4. Before plugging the Table Blender into the mains electrical supply, check that the
voltage and power supply comply with the specifications indicated on the rating
plate of the Table Blender.
5. Do not plug the Table Blender into the power supply until it is fully assembled and
always unplug before disassembling the Table Blender or handling the blade.
6. The Table Blender is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use
of the Table Blender by a person responsible for their safety.
7. Always place the Table Blender on a stable, flat, heat-resistant surface. Also
ensure that the surface can take the weight of the unit during use.
8. The Table Blender is intended for domestic use only and should not be used for
commercial purposes. The Table Blender should only be used for its intended
purpose.
9. Always keep the Table Blender out of the reach of children. Close adult supervision
is necessary when the Table Blender is used by or near children.
10. Do not leave the unit unattended when not in use.
11. Do not move or lift the Table Blender while it is operating or while it is connected
to an electrical socket.
12. The use of attachments, not specifically recommended by the manufacturer, must
not be used as they may cause personal injury or damage to the Table Blender.
13. Care should be taken when handling the sharp cutting blades, emptying the jug
and during cleaning.
14. When mixing hot liquid or food, excess pressure may build up inside the Table
Blender and this may cause the lid to come off and the contents to splash out.
Avoid mixing excessively lukewarm food and only place small quantities of
lukewarm liquid or food inside the Table Blender.
15. Do not use the Table Blender for very hard food products such as bones, shelled
nuts, frozen meat etc., as this may damage the blade or cause the motor to seize.
16. The blades of the jug are very sharp. Never touch the inside of the jug or place any
objects in the jug while the blades are turning.
17. The Table Blender is equipped with a safety function. The unit can only be
switched on if the jug is placed properly on the base and it is locked into position.
If the Table Blender cannot be switched on, remove the plug from the mains
power supply and check the connection between jug and base. Make sure that the
glass jug is properly locked into position before attempting to start operation.
18. Only start operating the Table Blender once the lid is tightly placed onto the glass
blending jug and the measuring cup has been inserted into the lid.
19. Do not operate the Table Blender if the plug or power cord has been damaged, is
not working properly, has been dropped or has been exposed to water or other
liquid.
20. Check the Table Blender power cord regularly for damage. If the power cord is
damaged in any way, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid an electrical hazard.
21. Do not allow the power cord to hang over sharp table edges or come into contact
with hot surfaces.
22. Make sure that the Table Blender is switched off and remove the plug from the
mains electrical supply when it is not in use, before it is cleaned, before changing
accessories or moving parts and while it is being repaired.
23. Take care when handling the sharp blades, when emptying the glass jug and
during the cleaning process.
24. Avoid potential injury through misuse.
25. To prevent the risk of electrical shock, do not immerse the power cord, plug, or any
non-removable parts of this Table Blender in water or any other liquid.
26. The Table Blender base must not be submerged in water, as any contact with the
electrical parts will create a malfunction and/ or an electric shock. Do not use the
Table Blender with wet hands.
27. Do not use the Table Blender outdoors.
28. Always turn the dial to position ‘O’ to switch off the unit before removing the plug
from the wall socket.
29. To unplug the Table Blender, grasp the plug firmly and remove it from the mains
electrical supply. Do not pull on the cord or carry the unit by its cord.
30. Never use the Table Blender if it is damaged in any way.
31. Use only spare parts supplied by the manufacturer or an authorised service centre.
32. All repairs may only be carried out by an authorised service centre. Improper
repairs may place the user at risk.
33. When handing the Table Blender over to a third party, ensure that this instruction
manual is supplied with the Table Blender.
KNOW YOUR TABLE BLENDER
