background image

 

- 6 - 

 

User’s Notice

Accessories and Safety Roles 

You can select various kinds of accessories to add to your MotoE 10000W, 
but improper assembly may bring about danger and damage.  
 
When loading additional cargo or installing accessories that may add to the 
air resistance, keep the center of gravity of cargo low and close to the center 
of gravity of the motorcycle. You must check the rack and other parts are 
installed carefully and make sure they are secured, otherwise, offset of the 
center of gravity may induce danger. 
 
Check and make sure the bikes' minimum ground clearance and inclination 
toward the sides are balanced. Improper installation of accessories is very 
likely to decrease the clearance and may become a safety concern. Always 
check the installation before riding it to make sure it won’t prevent you from 
parking and turning.  
 
If you install accessories at the steering stem or the fore fork, the steering 
may be influenced, and the load may induce vibration of the foreparts. 
Therefore, the weight of accessories on the steering stem or the fore fork 
must be kept to a minimum.  
Greater air  resistance caused by windshields, backrests, and travelling 
boxes, including saddlebags, may influence the MotoE 10000W’s 
stability. Improper installation or badly designed accessories would 
endanger  riding, so you must be careful to select and install these 
accessories properly. 
 

 

 

 

 

The installation of accessories must  not restrict the rider's operation  of 
the motorcycle. 

Additional electric devices may render primary coil overloaded, and 
serious overload may damage the electric devices. This could result in 
significant danger to the bike and the rider because of insufficient power 
of the motorcycle battery when riding. 

 

Safe Riding 

For  your  safety,  please  obey  the  following  rules  while  riding  the 
motorcycle: 

-

 

Wear a well-fitted helmet (helmets should be firm but not tight). 
A safe ride begins with putting on your helmet.  

-

 

Always wear protective clothing 

-

 

Pay attention to avoid wearing loose clothes. Please wear tight 
well fitted clothes to ensure your hands and feet can move freely.  

 

 

 

Содержание MotoE 10000W




































Отзывы: