BpTRU BPM100 Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 93

BpTRU BPM100 Скачать руководство пользователя страница 76

BpTRU Operator’s Manual

70

Cables and acceptable lengths

Cable

Length

AC power cord-set

1.8 m (6’)

Oral (blue) temperature probe

1.8 m (6’)

Rectal (red) temperature probe

2.4 m (8’)

USB cable

3.0 m (10’)

CAUTION

The use of accessories, transducers, and cables other
than those specified may result in increased EMF
emissions or decreased immunity of the system to
EMF within the surrounding environment.

Technical Modes of Operation

Technical modes of operation are available for the
BpTRU to change configurations, check functionality and
accuracy, and to connect the monitor to a computer.

BP Alert/Silent Mode

As well as the power-up tone, the BpTRU makes a short
audible tone after completing a series of measurements
in Automatic mode. This feature is enabled by default,
but can be disabled and re-enabled as follows:

1.

Turn the BpTRU off using the power switch.

2.

To toggle BP Alert/Silent Mode, hold

Stop

while

turning the BpTRU on.

Repeating this toggles the BpTRU to the previous state.

Alert Mode is indicated by three short beeps followed by
one long tone during power up.

Silent Mode is indicated by three short beeps during
power up without a final long tone.

«
...
74
75
76
77
78
...
»

Содержание BPM100






























































































Отзывы:

Нет отзывов