Digital Wireless
Power ON/OFF
Antenna
Pairing Button
Brightness
Revolving Button
Contrast
Power Indicator
Pairing Indicator
TFT-LCD
Power Supply
Socket
Video out
Structure
Rearview Camera
Installation
Installation of the wire camera.
(Only for reference) :
1. Drill three holes above the
license plate frame: one for
passing the cable through
the car body; two for installing
camera. Before drilling, check
whether there is any part
behind the hole-drilling position.
If there is, for example,
electronic part or fueling
system part, take all necessary
measures to avoid any possible
damage to these parts. If the
car has existing holes, please
skip this step;
2. After the hole is drilled, insert
the supplied washer, and then
pass the power cable through
the Grommet and into the car.
The Grommet shall be used to
prevent the metal side of the
hole from cutting the power
cable;
3. Adjust the camera to a suitable
angle for view;
4. Install Camera Screws we supplied
to the other holes with the
camera.
5. Connect the camera to the Transmitter Box,
Transmitter
box
Wire
Camera
Red
Black
+12V
DC
REV LAMP
Reverse Lamp
Ground
Power
Connection
RCA
Connection
Power input
Power output
Transmitter Box
Pairing Button
Power Supply Connection
Antenna
Wire Camera
Video output
Video input
