This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
FCC Information
Cautions
●
The apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
●
Turn off the Camera/Monitor if the system is not in use.
●
The Camera/Monitor can only be completely disconnected
from the mains by unplugging the adapter.
●
Do not cut the DC power cable of the apparatus to fit with
another power source.
●
Attention should be drawn to the environment aspects of
battery disposal.
350
Items
LCD Screen Type
Lens Mount
DISPL
A
Y
Specification
Unit
15%~85%
-
20~+60°
Storage Temperature
Operation Humidity
℃/°
℃/°
RH
Effective Pixels
Brightness
320 X 240
3.6", TFT LCD
cd/m
2
200
Contrast
degree
L:60/R:60/U:40/D:60
VIDEO
Frame Rate
fps
30
Video Resulutions
VGA
Video Compression
MPEG-4
Video Signal Output
CVBS
，
1Vp-p@75ohm
Video Output Format
PAL/NTSC
RF
Operating Frequency
MHz
2400
－
2483.5
Bandwidth
4.4 20dB BW
(
)
MHz
Modulating/Demodulating Method
16QAM,QPSK,BPSK
Transmitting Power
dBm
+14dBm @ 16QAM EVM 5%,
+18dBm @ QPSK EVM 8%
Receiving Sensitivity
dBm
-72dBm@QAM, -85dBm@QPSK
Safety
Proprietary Frequency Hopping
Signaling With Digital Modulation
32Bit ID
Antenna Gain
dBi
2(Omni-directional Dipole)
Unobstructed Effective Range
m
≥
50
GENERAL
Power Supply
DC +12/24V
Consumption Current
mA
250(max)
Weight
g
128±20
Dimensions
mm
108x75x38
Operation Temperature
-
10
～
+50
Specifications
* All the specifications are subject to minor change without prior notice.
BOYO SENSORS
BACK UP SENSOR SYSTEMS
