BTUN-02
AM/FM TUNER WITH RS232
Tuner Operation
MAKE AM/FM SELECTION
1. Press the MENU button slowly until either the ENTER and MHz characters flash, or the ENTER and kHz characters flash.
2. Press the ENTER button until either MHz or kHz stops flashing.
3. Press either UP or DOWN button to obtain MHz or kHz. (
note
– MHz is the FM band and kHz is the
AM band)
4. Either wait until the ENTER stops flashing or depress the ENTER button.
EZ Steps:
1. Press MENU once
2. Press ENTER
3. Press UP
4. Press ENTER (or wait 3 seconds)
SELECT AUTO OR MANUAL TUNING
1. Press MENU button slowly until AUTO and ENTER flash.
2. Press ENTER button to stop flashing.
3. Press UP or DOWN button to change to a new tuning mode.
4. Press ENTER to switch to the new mode.
EZ Steps:
1. Press MENU twice
2. Press ENTER
3. Press UP
4. Press ENTER (or wait 3 seconds)
LISTEN TO PRESET STATIONS OR SCANS
1. Press MENU slowly until P-SCAN and ENTER characters flash.
2. Press ENTER.
3. Preset stations or scans will continue to advance until the ENTER button is pressed.
EZ Steps:
1. Press MENU three times slowly
2. Press ENTER
3. When desired station is playing, press ENTER
NOTE
. Although the display only shows frequency steps of 0.1MHz, the actual tuning is done with steps
of 0.05Mhz. (in EU mode only)
